ISO 9001 · IATF 16949 · ISO 13485 CERTIFIED

Precision Molded Components, Engineered to Print

Datumold manufactures precision molded components: silicone keypads, LSR parts, overmolded assemblies, gaskets, and 2K injection-molded housings. Every part ships with PPAP-grade documentation, built for buyers who cannot afford a recall.

Precision silicone, rubber and plastic molded components for medical, automotive and industrial OEMs
How we engage

Engineering communication, not order taking

Before we quote, we read your drawing. If something doesn't add up, we tell you before tooling is committed. That includes mismatched part numbers between the inquiry form and the drawing, contradicting tolerances, or a callout that won't survive demolding.

For new projects, our engineering team typically returns with 2 to 6 clarification questions within 24 hours of RFQ receipt. We have found this saves customers an average of 2 to 4 weeks per project versus going straight to quote.

24 hrs
Engineering response on every RFQ. Not "we received your inquiry," but an actual technical review.
2 to 4 wks
Average project time saved by clarifying drawings before tooling.
3
Possible responses to your RFQ: direct quote, clarification request, or DFM feedback. Never a silent quote that misses the spec.
Quality system

Triple-certified molding manufacturer

ISO 9001:2015
General quality management system. Applied across all silicone, rubber and plastic molding lines.
IATF 16949:2016
Automotive-grade quality management. Supports PPAP Levels 1 to 5, APQP, PFMEA, and SPC reporting.
ISO 13485:2016
Medical device quality management. Class I and II component manufacturing under controlled environment.
PPAP & 8D ready
Full documentation support. PPAP packages, 8D reports, and batch traceability with AW cards on request.
What we manufacture

Six core molding capabilities

Silicone Keypads & HMI Components
Custom silicone rubber keypads, conductive (carbon pill) keypads, P+R hard-top keypads, and membrane keypads for industrial controls and HMI panels.
See keypad capabilities →
Liquid Silicone Rubber (LSR) Molding
LSR injection molding for medical (USP Class VI, ISO 10993) and automotive precision parts. Cycle times from 15 seconds. Up to 64-cavity tooling.
See LSR molding →
Overmolding & Two-Shot Molding
Silicone overmolding, PCB overmolding (low-pressure), custom overmolded cable assemblies, and 2K injection molding for multi-material components.
See overmolding services →
Silicone Gaskets & Seals
Custom silicone gaskets (solid and foam), silicone rubber seals, and high-temperature gaskets (FVMQ). Die-cut and molded. 3M VHB backing available.
See gaskets and seals →
Custom Plastic Injection Molding
Custom plastic injection, precision injection molding for tolerances to 0.05 mm, and 2K injection molding. Engineering thermoplastics up to PEEK and PPS.
See plastic injection →
Custom Rubber Parts
Automotive rubber parts (NBR, EPDM, HNBR, FKM), vibration damping components, and rubber-to-metal bonded parts (Chemlok-bonded).
See rubber parts →
Industries we serve

Built for demanding applications

Medical Devices
ISO 13485-certified silicone and plastic components for medical device OEMs. USP Class VI and ISO 10993 biocompatible materials. Class I and II component manufacturing. Post-cured silicone to remove volatile siloxanes (D4, D5, D6).
Medical device capabilities →
Automotive
IATF 16949 production for Tier-1 and Tier-2 automotive suppliers. PPAP Levels 3 to 5 documentation, APQP project gates, PFMEA, control plans, and Cp/Cpk capability studies. IMDS material declaration.
Automotive capabilities →
Industrial Electronics
Silicone keypads, low-pressure PCB overmolding (IP67/IP68 sealing), custom overmolded cable assemblies, and HMI components for industrial controllers, instrumentation, and white goods OEMs.
Industrial electronics →
Capabilities at a glance

Engineering specs we work with daily

30 to 80
Shore A
Standard silicone hardness range. LSR durometer from 5 to 70 Shore A.
0.05 mm
Tolerance
Typical tolerance for molded silicone parts. Tighter on application-specific requirements.
1 to 64
Cavity tools
In-house multi-cavity tooling. Up to 64 cavities for high-volume LSR.
USP VI
Biocompatibility
Medical-grade silicone compounds. ISO 10993 and FDA 21 CFR 177.2600 compliant materials.
Next step

Send us your drawing or RFQ

For new projects, our engineering team typically returns within 24 hours with one of three responses:

  1. Direct quotation, when the drawing is complete and the application is one we have produced before.
  2. Clarification request, when we identify inconsistencies in the drawing (for example, dimensions that conflict between views, or tolerances that won't hold in molded silicone). We ask before quoting, which avoids costly tooling revisions.
  3. DFM feedback, for early-stage designs. We suggest geometry, material, and tooling changes that reduce tooling cost or improve yield, while keeping the design intent.

For PPAP-grade automotive projects and ISO 13485 medical projects, we include a project initiation checklist and qualification plan with the first response.